Diamond grinding wheel are used to grind hard alloys, glass, ceramics, gems and other materials. Some precautions when using diamond grinding wheels have been introduced before. So do you know how to maintain diamond grinding wheels? Here are some methods for maintaining diamond grinding wheels:
1.If the diamond grinding wheel is not used immediately, it should be laid flat or suspended by the inner hole. No other articles or feet can be stacked on the flat grinding wheel, and it should be protected from moisture and rust.
2.When the diamond grinding wheel is no longer sharp and the cutting surface is rough, it must be reground in time. Grinding cannot change the original angle and disrupt dynamic balance.
3.The inner diameter correction and positioning hole processing of the diamond grinding wheel must be performed by the factory. If the processing is not good, it will affect the use of the product and may be dangerous. In principle, the reaming cannot exceed 20mm of the original hole diameter, so as not to affect the balance of stress.
The above are some methods for maintaining diamond grinding wheels. Maintaining diamond grinding wheels is conducive to increasing the service life of diamond grinding wheels and the safety during use. I hope the above content is helpful to everyone, and if you have any questions, please feel free to consult!
.jpg)
